articles
- nci defects
- corona on nci
- oht monitoring
- corona rings
- adss
- aging adss
- aging nci
- airborne inspection
- factors affecting corona
- combined multi densors
- corona & smart-grid
- oh catenary lines
- cost considerations
- practices for uas
- corona affects wildlife
- NCI pollution - case study
need more info?
Keywords
keywords: Ofil Solar Blind product UV systems EPRI-USA DayCor® corona ELOP Elbit Systems
ARTICLES
- L. Chen, et al., Comparison of methods for determining corona inception voltages of transmission line conductors, Journal of Electrostatics (2012) »»
- Ofil's Daytime Corona Camera presetations - can be watched on any mobile device »»
-
A sailing start - Transmission and distribution world ... »»
... he came up with the idea and developed the DayCor camera, a daytime predictive maintenance system for the inspection and detection of partial discharge ...
-
Monitoring The Insulator Condition By On-Line
Voltage Distribution Measurement
2008 International Conference on Condition Monitoring and Diagnosis, Beijing, China, April 21-24, 2008
I.A.D. Giriantari, Department of Electrical Engineering, Udayana University, Denpasar – Bali IndonesiaDetection and monitoring the insulator condition usualy start by doing a visual detection using daycor to detect defect on the insulator that cause corona. If there is defect or pollution on the insulator surface, corona usually can be detected. Cleaning will be able to minimize the corona if it is caused by pollution. When defects are there in particular internal defect, cleaning will not give any help. The only way is replacing the defected insulator.